All our products are CE officially approved PPE under EN 17092 safety by European commission approved body.

ABRASION RESISTANCE

Darmstadt method. This test simulates the stress that is placed on the protective garments when worn by an average rider with a body mass of 75kg and a height of 1.75m when sliding from variable initial speeds to a standstill on a real concrete road surface. To pass, no holes with an opening of 5mm or more in any direction are to be present on the layer closest to the body.

STRENGHT OF SEAMS

Three test pieces of each seam, including all layers of materials from the garment present in the stitching, are tested. The seam strength is calculated by dividing the braking force by the length of the tested seam.

TEAR STRENGTH

Six trouser leg type specimens are taken from each garment’s material and are torn apart using a standard tensile test machine. Materials shall be tested in two directions – warp and weft

IMPACT ABSORBITON

Elbow, shoulder, knee, and hip impact protectors are to be present in Class AAA and AA garments as a mandatory requirement, with the hip protectors being optional in Class A garments. Impact protectors must be positioned in the garment to cover the appropriate body part, according to the relevant impact protector standard.

OTHER CONDITIONS

Dimensional stability, general view. Ergonomi and fitting.